📞 857-214-2434✉ request@hiresmooth.comEast Boston, MA · Mon–Fri 6:30am–5:00pm
⚡ Mass Save® Certified★★★★★ 5.0 GoogleLeave a Review ↗
🏗️ For General Contractors & Project Managers

Your Most Reliable Insulation & Interior Sub.

Smooth Construction Services partners with GCs throughout Massachusetts, New Hampshire, Maine, and Rhode Island. We show up on schedule, perform to spec, communicate clearly, and never leave a GC explaining someone else's problem. Residential and commercial — any scope, any phase.

Request Sub Bid → 📞 857-214-2434
Licensed & Insured MA
Commercial & Residential
15+ Years On-Site
Multi-Trade Under One Sub
5.0 ★ Google
Why General Contractors Choose Smooth

The Sub That Makes Your Project Run Smoother

We understand the GC's world: tight schedules, budget pressure, and the constant challenge of coordinating trades that actually show up. Smooth was built around these realities. When we commit to a scope and a start date, we deliver on both — every time.

📅

Schedule Reliability

We commit to mobilization dates and maintain them. No last-minute reschedules, no disappearing acts mid-project. Your schedule is our schedule.

💬

Clear Communication

You reach the actual person making decisions — not a dispatcher. We flag issues immediately, not after they become problems for the GC.

🔧

Multi-Trade Efficiency

Spray foam → drywall → plaster → paint under one sub contract. One schedule, one point of contact, zero gaps between trades.

🏢

Residential & Commercial

Single-family additions, multifamily gut-rehabs, office buildouts, retail fit-outs. We have the crew size and equipment for any scope.

📄

Documentation & Compliance

Insurance certificates available within 24 hours. MSDS sheets, product data, and installation documentation provided with every project close-out.

Mass Save® Expertise

We handle all Mass Save rebate paperwork. For residential projects, this means your client's insulation scope is often funded at 75–100% — making scope increases easy to approve.

🔧

Correct Installation Sequence

We know exactly how insulation, drywall, plaster, and paint hand off to each other. No rework from installation sequence errors.

📋

Clean Jobsite Standards

We treat your jobsite as if our reputation depends on it — because it does. Spray foam equipment is maintained, plastic sheeting is thorough, and cleanup happens every single day.

🌟

GC References Available

Multiple active GC relationships throughout the region. Call us and we'll connect you directly with other project managers who've worked with us across multiple projects.

Our Work Phase System

How a Smooth Project Runs

Every project — residential addition or commercial buildout — follows our 6-phase system. Each phase has clear deliverables and a defined handoff to the next trade. GCs know exactly what to expect and when.

01

Estimate

Bid submission within 48 hrs. Detailed scope breakdown.

02

Pre-Insulation

Site prep, masking, framing verification, utility coordination.

03

Insulation

Spray foam, blow-in, or batts per spec. Air sealing included.

04

Drywall

Hang, tape, mud to specified finish level. Prep for plaster or paint.

05

Plastering

Veneer or traditional plaster. Ornamental restoration on historic work.

06

Painting

Prime, finish coat, trim, cabinetry. Move-in ready result.

📋 Phase 01 — Estimate
  • Bid packages reviewed within 24 hours
  • Written estimate submitted within 48 hours
  • Scope includes all labor, materials, cleanup, and waste disposal
  • Mass Save rebate credit noted for applicable residential scopes
  • Alternate pricing for different insulation types included on request
🔥 Phase 02 — Pre-Insulation Prep
  • Coordination with framing, plumbing, and mechanical trades
  • Rough-in inspection walkthrough before foam day
  • Spray foam equipment calibrated on-site (not pre-loaded)
  • HVAC, electrical, and plumbing penetrations identified and flagged
  • Masking and plastic protection of all finished surfaces
❄️ Phase 03 — Insulation Installation
  • Spray foam (closed-cell or open-cell), blown cellulose, or batt per spec
  • Air sealing of all penetrations performed before insulation
  • R-value verified and documented for code compliance
  • 24-hour cure time respected before other trades re-enter
  • Photo documentation of all installed assemblies provided
🏦️ Phase 04 — Drywall Installation
  • Hang blueboard, gypsum, or specialty board per specification
  • Level 4 standard finish; Level 5 skim coat available on request
  • Fire-rated assemblies per plan specifications
  • Moisture-resistant board in bathrooms, kitchens, and below-grade
  • Board delivery coordinated with project schedule
🧿 Phase 05 — Plastering
  • Veneer plaster over blueboard — fast, durable, superior finish
  • Traditional three-coat for historic restoration projects
  • Skim coat over existing gypsum for renovation updates
  • Ornamental work, medallions, and period moldings matched
  • 48–72 hr cure before painting on veneer applications
🎨 Phase 06 — Painting
  • Full surface prep: filling, sanding, priming per substrate
  • Benjamin Moore or Sherwin-Williams specified-grade paints
  • Walls, ceilings, trim, doors, and cabinetry in single mobilization
  • Move-in ready result — not just a quick coat
  • Touch-up walkthrough with GC or owner before sign-off
Scope Capabilities

Residential & Commercial — Any Scale

We work with GCs across the full spectrum of project types. Our crew scales up or down to match your project — and we're available to mobilize across all of Massachusetts, New Hampshire, Maine, and Rhode Island.

🏠 Residential Projects

  • ✓ Single-family new construction — all interior phases
  • ✓ Gut-rehab renovations — insulation through paint
  • ✓ Additions and bump-outs
  • ✓ Basement finishing and waterproofing prep
  • ✓ Attic conversions and dormer additions
  • ✓ Historic restoration (pre-1900 homes)
  • ✓ Energy retrofit / Mass Save project scopes
  • ✓ Multifamily residential (2–50+ units)

🏛️ Commercial Projects

  • ✓ Office buildouts and tenant improvements
  • ✓ Retail and restaurant fit-outs
  • ✓ Warehouse and industrial insulation
  • ✓ Medical and healthcare facilities
  • ✓ School and educational buildings
  • ✓ Multifamily residential / mixed-use
  • ✓ Hotel and hospitality renovations
  • ✓ Large-scale spray foam (cold storage, distribution)
From Other General Contractors

What GCs Say About Working With Smooth

DS
David SavoryWestborough, MA · General Contractor
★★★★★

"I'm a G.C. and very selective about who I work with. I've worked with Andre and Smooth for several years — always quick to respond, professional, honest, trustworthy. Quality work at very reasonable pricing. They're my go-to insulation and drywall sub."

Multi-year GC Partnership
JH
Jesse HolmesFramingham, MA · General Contractor
★★★★★

"As a G.C., had Smooth spray foam insulate, board and plaster a 2,000 sq ft addition. Great communication throughout. Work done quickly, professionally, and with consistent quality. Will use again on future projects."

2,000 SF Addition
BL
Brett LeClaireSudbury, MA · Project Manager
★★★★★

"Great guys. Did insulation, drywall, plaster and paint on my 3-story addition project. Made coordinating everything so much easier — one sub handled the full interior sequence without a single handoff problem."

3-Story Addition — Full Interior
Start a Project

Ready to Add Smooth to Your Approved Sub List?

Send us your bid package or call directly. We respond within 2 hours on business days. Insurance certs available same day.

📞 857-214-2434 Send Bid Package →
📞 Call Now Free Estimate